Save $31.94 with this Woodturners Bundle!

Includes:

• Threaded, reusable, aluminum glue hub with hardwood waste block
• 6.5" diameter x 3.5" thick segmented bowl blank with center point for simple gluing
• Wrench for loosening hub from lathe spindle
• Once you've completed your turning, the glue hub and waste block can be reused for other projects!
• Finished bowl(s) not included, shown in pictures only to give an idea of what could be made from the bowl blank.

Glue Hub Features:

• SIMPLE:Turn both inside, outside and bottom without removing and reversing project
• EXTRA SPACE:creates more room for shaping bottom or foot as it is smaller than a 4-jaw chuck and moves project away from the headstock
  
• SAVES WOOD:No need to lose wood on a tenon. Consume the waste block when parting your project off
  
• LONG LIFE:Add more fine-grained hardwood to extend waste block
  
• REUSABLE:Aluminum won’t crack or break over time
  
• REMOVEABLE:Remove project from lathe multiple times without losing center alignment.
  
• CONVENIENT:No screws or jaws. Thread hub onto lathe, glue your wood project directly to the waste block, use your tailstock to hold, and start turning once the glue dries.
  
• THREADED:Threads directly onto your lathe spindle, or can be reversed and held in tail stock.
  
• HOLDS SECURELY:Waste block features ” deep milled pocket that the glue hub is glued into resulting in a more secure hold than a butt joint. No more coming loose from chuck jaws.
  
• LIGHTWEIGHT:Weighs 16 oz (with waste block) vs 4-jaw chucks that weigh 4 lbs
  
• WORKS WITH RESIN:Without the waste block this can be glued or molded directly into a resin project.
• We always recommend using tailstock support as much as possible when turning. This can be done with a live tailstock chuck and a center point.

Glue HubDetails:

• CNC machined from 6061 aluminum
• 1.90" outside diameter
• 3.5" Overall Length
• Choose from either 1" - 8 TPI threads or 1.25" - 8 TPI

Hardwood Waste Block:

• Arrives pre-glued to hub using clear Gorilla glue.
• Routered from kiln dried hard maple.
• 2.5" diameter x 1.5" long
• Milled pocket is 0.50" deep, so your glue hub sits inside the waste block 0.50".
• Once your original waste block becomes 1" long, we suggest that you add additional fine-grained hardwood, such as hard maple,to the waste block. This will allow you to separate your project without consuming the original waste block.

Wood Blank:

• Comes already round ~ No Outside Roughing
• Comprised of 2 maple segments, 2 walnut segments, 2 cherry segments and an ash base, all kiln dried
• Measures 6.5" diameter by approximately 3.5" thick
• Just glue to your waste block, allow to dry and you're ready to start turning.
• We always recommend using tailstock support as much as possible when turning. This can be done with a live tailstock chuck and a center point.

Wrench: fitsall vacuum chucks & Glue Hubs made by Simple Woodturning Tools.

• Lightweight: Weighs only 3 oz
• Machined from .25" thick aluminum
• Wrench Opening: 1.745"
  
• Wrench Length: 5.75"
• Wrench Width: 2.90"
• Hole Openings (x3): 0.26"